|
Post by low1000 on Mar 22, 2006 17:49:37 GMT 10
|
|
|
Post by tom210 on Mar 22, 2006 20:37:25 GMT 10
thats so sweet i love it already
|
|
|
Post by vonster on Mar 22, 2006 22:21:06 GMT 10
SWEET!!!!!!! It's going to eat KE50s!!!!!! Vonster.
|
|
|
Post by datsunlimited on Mar 22, 2006 22:38:54 GMT 10
way to go round motor with dato shell bloody brillant ;D
|
|
DFL8TD
Cherry
Layin' rail...
Posts: 60
|
Post by DFL8TD on May 28, 2006 23:40:53 GMT 10
brings back the memories of my ol 1000 wagon. where di u purchase this from? my old bus had 13B Pport, they love a small motor but you'll struggle to fit a decent sized turbo in that engine bay!
|
|
|
Post by low1000 on Jul 24, 2006 11:13:59 GMT 10
hey there, it has been a while since i have been online, i purchased my 1000 from latrobe, a few months later i got another 1000 panelvan for parts,,,, aparently it has a 13b bridgeport in it and they used to drag it lol, i got the second on from westbury could it be yours??? lol
My 1000 is at the bodyworks at the moment so it should be on the roud in a few months when i get my P's YES... loL
|
|
DFL8TD
Cherry
Layin' rail...
Posts: 60
|
Post by DFL8TD on Jul 25, 2006 12:44:35 GMT 10
yeh mine was sold to a guy in westbury...small world eh? how much did u get it for? not keen on selling if it still has motor in it?
|
|
osr20t
Off and Racing
Posts: 12
|
Post by osr20t on Aug 1, 2006 21:52:19 GMT 10
i want it
|
|
|
Post by tom210 on Jan 27, 2007 18:09:48 GMT 10
nice once again
|
|
|
Post by b10wagon on Feb 12, 2007 13:30:56 GMT 10
would any 1 have rotary mounts for a 1000 im thinkin of puttin a rotary in mine
|
|
|
Post by low1000 on Feb 22, 2007 9:04:19 GMT 10
Rotary,,, Hmm... well i looked into it, you would need to get a sump made because you cannot modify the x-member because of the GEEYYY suspension. its alot of work but anything can be done.. Probably need to make your own mounts, love the ideah
|
|
|
Post by low1000 on Mar 22, 2007 21:33:47 GMT 10
Bump... New dash....
|
|
|
Post by low1000 on May 16, 2007 23:12:32 GMT 10
Yo... UPDATE Engine bay getting painted now... then i put the engine back in next week or so... Got a couple more things... Seats: With sparco Harness's Wheel: sparco... Note 90mm Dish I have also been doing a little work on the head..
|
|