|
Post by datfreak on Aug 13, 2008 12:05:23 GMT 10
|
|
|
Post by datfreak on Aug 13, 2008 12:20:21 GMT 10
Been Slack, but I have got stuck into it over the past weeks. Engine at machine shop now! L20 40" oversize Flat top pistons, 42 degree cam, 44mm inlets with 45mm webers.... Old school is cool!
|
|
|
Post by Datsunreal on Aug 13, 2008 12:57:45 GMT 10
lookin good mate, where did you get the inlet valves? might see you on the weekend = Gordie brown
|
|
|
Post by datfreak on Aug 13, 2008 21:08:36 GMT 10
The guy at Tas engine reco can get the valves. They are stainless.
|
|