|
Post by jpav260z on Jul 6, 2010 19:35:32 GMT 10
Hi all, below is info regarding the next Dyno Day at my mate Nick Summers' workshop GT Garage in Derwent Park, would be good to see a Datto out there, should be a good day, cheers, John Date: Saturday, July 17, 2010 Time: 12:00pm - 3:00pm Location: GT GARAGE - Factory 3 / 6 Lampton Ave
Description.GT GARAGE DYNO DAY - SATURDAY JULY 17th 2010!! Starting at 12:00 and finishing around 8:00pm! Factory 3 / 6 Lampton Ave, Derwent Park, Tasmania
PRIZES/TROPHIES FOR THE FOLLOWING CATEGORIES: Outright Power (2WD) Outright Power (4WD) Power Per Litre Best Presented Car
Three Runs on the New Mainline AWD 1200kw Dyno including associated printouts (POWER, AFR, BOOST, etc) for $80!! (eftpos facilities available)
Places are filling fast so email me at nick@gtgarage.com.au or call me on 0488322064 to reserve your spot!
BBQ, Soft Drinks, Tea/Coffee available on the day with all profits to the Tasmanian Ambulance Service. Please support them!
Due to many requests we will have an outdoor gas heater to keep you all warm, and the LCD TV has been repaired!
please note: any irresponsible driving (as experienced last time) will not be tolerated and the police will be provided with your registration details.
Hope to see you all there! :-)
Regards, Nick Summers
|
|
FrAz
120Y
'240K enthusiast'
Posts: 85
|
Post by FrAz on Jul 6, 2010 20:38:23 GMT 10
Get the 260 on there!
|
|
|
Post by stephy on Jul 6, 2010 21:34:58 GMT 10
Dooooooo ittttttttttttt!
|
|
|
Post by jpav260z on Jul 7, 2010 8:35:58 GMT 10
ha ha, there's no prizes for lowest power figure, maybe at the next one it'll have the NEO in it. Hey Matt, are you able to bring down those tail lights for me to look at if you're coming?
|
|
|
Post by Datsunreal on Jul 7, 2010 12:20:15 GMT 10
Hi nick
what are your normal rates for the dyno? i will need some dyno work done on my 240k eventually. do you have experience tuning Haltech computers? mine is an F10
|
|
|
Post by jpav260z on Jul 7, 2010 19:53:21 GMT 10
Hi Datsunreal, not sure on Nick's rates ( might be $150p/h for tuning ) but I do know that he can tune Haltech and has done a fair few of them, so it's probably best to give him a call or email, his details are mentioned in my original post, cheers, John
|
|