|
|
Post by datomad1976 on Sept 29, 2010 9:27:46 GMT 10
any idea on mods i might need to fit the stanza five speed to my 200B. eg are the splines in back of box the same, tail shaft shortening mountings need moving ??. its the box where reverse is where first is. im not doing any major engine mods so im thinking it should be strong enough. was going to put a six cylinder one in but this one came up cheap and i like the idea of quick shifts from second to third and back. Attachments:
|
|
|
|
Post by Heath Robinson on Oct 4, 2010 7:24:57 GMT 10
you will need a longer tail shaft for the sanza 5 speed. unless u wanna swap for my 5 speed. ive been after a stanza 1 for a while and the blurbird 1 i have will go str8 in u will just need the cross member thats already on the 200 b
|
|
|
|
Post by datomad1976 on Oct 14, 2010 9:33:25 GMT 10
so where are you at. i on north west coast i wont travel to far dont have the time
|
|
|
|
Post by Heath Robinson on Oct 14, 2010 12:46:28 GMT 10
ahh no good im in hobart and dont have transport at the moment. ill let you kno if i can get up that way sometime.
|
|
