|
Post by Rintin1600 on Sept 8, 2010 18:41:55 GMT 10
Finally My Datto has been approved by Transport and Engineer ;D ;D ;D Now just have to wait for Transport to approve the Engineers Approval??? Wicked Shit
|
|
|
Post by Datsunreal on Sept 9, 2010 7:55:27 GMT 10
Nice one timmy! there goes your drivers licence!
|
|
|
Post by Rintin1600 on Sept 9, 2010 18:35:51 GMT 10
Screw you Tom! I'm a sensible parent now. I stay below 36kms above the speed limit
|
|
|
Post by Rintin1600 on Sept 9, 2010 19:07:41 GMT 10
What are the centre caps you need? People at work are like ohhhhh not likely.. Looks like I owe you some $$$$$ Let me know and I'll look into it otherwise give me a dollar amount for tops and I'll fix you up Thanks for your help. Btw Nicho is stoaked about your Dads fishing endevours.. He can't believe it (fishing nut) Chat soon/Drive soon Rta has to approve engineers approval of the Rta's Approval?
|
|
|
Post by Datsunreal on Sept 10, 2010 10:20:12 GMT 10
ROH chrome centre caps for GT 12 slotters, i spoke to ROH head office and they said they are still avaliable "through your local tyre dealer" thats you mate ;D
did you decide to keep those strut tops?
|
|
|
Post by Rintin1600 on Sept 10, 2010 19:14:55 GMT 10
Andrew is away till Tuesday... I'll get him on it. Don't need them but they are fancy and make the most unbcomfertable datto even more so... consider them sold! ;D
|
|
|
Post by Rintin1600 on Sept 10, 2010 19:16:05 GMT 10
Who Needs teeth/fillings anyway??
|
|
|
Post by Rintin1600 on Sept 17, 2010 19:09:52 GMT 10
Engineer approval completed next Friday....... Then Rego inspection and YeeeeeeHaaaaa! 2 weeks and counting!
Finally you will see the power of my Fully oprational DAT-SUN!!
|
|
|
Post by Datsunreal on Sept 20, 2010 8:10:11 GMT 10
good one, you nutter
find me some centre caps did you?
|
|
|
Post by Rintin1600 on Sept 20, 2010 20:38:51 GMT 10
$45 each! Thats cheap apparently???
I will get them for you in exchange for strut tops if that is your wish
|
|
|
Post by Rintin1600 on Sept 20, 2010 20:40:46 GMT 10
Just bought Rx7 4 piston calipers for an upgrade to my upgraded brakes (seeing as they fit under my 16's, why not!)
More Speed, More Power, More Braking!!!
|
|
|
Post by scando on Sept 21, 2010 13:44:42 GMT 10
Hey Timmy, if they're series 4/5 RX7 calipers I have some pads leftover from when I used to run those calipers. They're Project Mu pads, the same compound as what the V8 supercars use. One set is barely used, the other a bit over half worn. They retail for over $500 a set. I'll sell both sets I have for $150 if you're interested.
Cheers Shane
|
|
|
Post by Rintin1600 on Sept 21, 2010 15:48:59 GMT 10
I'll give you $100 ;D
|
|
|
Post by Datsunreal on Sept 24, 2010 15:50:55 GMT 10
that sounds about right, 4 x centre caps for 2 x strut tops ;D you registered yet? when are we going out to get arrested
|
|
|
Post by scando on Sept 30, 2010 13:30:17 GMT 10
|
|
|
Post by Datsunreal on Oct 18, 2010 10:04:08 GMT 10
you got rego yet? got me some centre caps?
|
|
|
Post by Rintin1600 on Dec 5, 2010 7:09:45 GMT 10
;D ;D ;D ;D Finally got compiance plate!!!
Now Pits and then Turbo Santa is Ho!!!!!!
|
|
|
Post by Datsunreal on Mar 6, 2011 15:03:39 GMT 10
Today i drove Tims brown super datto. man it flies, still looks crap but it goes like shit through a goose. ive been in a few turbo datto conversions and this one is by far the best. it feels like the engine was meant to be there, unlike some more agricultural conversions ive been in where it feels like the whole drive train is trying to escape. Congrats to you Tim for finishing it! its been a long time in the making. any idiot can buy a car like this but few can build one. Well done mate! ;D
|
|
|
Post by Rintin1600 on Mar 10, 2011 6:31:34 GMT 10
Thank Tom, Loved your crazy take of onto highway ;D . Full Throttle is rarely needed
|
|
|
Post by scando on Oct 27, 2011 5:48:21 GMT 10
Did I spot you on the Southern Outlet yesterday morning?
|
|