|
Post by datsunlimited on Mar 27, 2009 19:25:19 GMT 10
hey guys long time no chat i have not had access to the net for a while now. but thanks to keegs im here. i am putting together another bluebird this one is powered by the mighty ca20 i give her lil polish and the flywheel has been on a diet. this dangrrrr is for khanacross/ motorkhana and maybe a few gravel events. will post pics when i can find camera....
|
|
|
Post by datsunlimited on Apr 16, 2009 17:15:41 GMT 10
i finally have got flywheel back on and box mated up just need to sort out tail shaft. we have been busy re wiring from scratch so i could piss off everything not needed. it has been fully stripped anything that dont make it go faster has been takin off.
i found some old paint and mixed her together give her lick.
needs some good shocks and springs.
i will be using r31 front brakes (vented)
|
|
|
Post by datsunlimited on Jan 13, 2010 19:07:53 GMT 10
well thought id update this one, stripped everything car has bare minimum to operate and started re wire again all completed .got all car together with old bits i had sitting injection head, cause other one was stuffed, efi pump exhause extractors and side pipe, 32/36 makita special all went well.
tried her out last year at motorkhana 4 drivers lots of fun but also lots of troubles.
leaked all fluids master cyl seal was shot, cracked fuel filter was sucking air and running out of fuel on full throttle, and oil from breather hose under manifold silly me in the rush to get her there forgot to plumb her in. good day we all had fun untill cheap universal battery mount snapped sent bettery into pullyss acid everywhere lol missed out on last few runs.
have decided to use x member out of skybird that held rb20 det in place, into this motorkhana car then fit rb30 auto out of brown r31 project, which will be replaced with the 20 building as track car.with bits out of skybird
|
|
|
Post by datsunlimited on Mar 21, 2010 15:24:12 GMT 10
rb 30 auto is in there just had to cut bit of tunnel pics on my facebook page. just need to strengthen the chassis rails and mount gear box and she ready for tail shaft
|
|
|
Post by datsunlimited on Mar 26, 2010 13:37:08 GMT 10
rb 30 Attachments:
|
|
|
Post by datsunlimited on May 6, 2010 11:43:59 GMT 10
does anyone want any bits i going to strip this car as i dont really have room for it , need to focus on the 20......
|
|
|
Post by datsunlimited on Sept 12, 2010 12:29:06 GMT 10
well i have purchased another couple of blueys lol you think i would have learnt now lol...... looking for l20b extractors and ca 18 bits.... i will post some pics up soon some on my facebbok if anyone want to look.. one is a rallybird fitted with cams cage need fair bit of work, other is series 2 road car real good condition for a bluey lol
|
|